How to set up an FTP server on Ubuntu 14.04
Setting up a fully-functional and highly secure FTP server on Ubuntu is made very easy with a handful of key components and a couple minutes of your time. From anonymous FTP access, root directory restrictions, or even fully encrypted transfers using SSL, this tutorial provides all the basics you'll need to quickly get your FTP server up and running.
|DIFFICULTY||Basic - 1 | Medium - 2 | Advanced - 3|
|TIME REQUIRED||20 min|
|RELATED PRODUCTS||Ubuntu-based VPS or dedicated servers|
While there are a variety of FTP server tools available for Linux, one of the most popular and mature options is vsftpd.
Begin by SSHing into your server as root and use the apt-get command to install vsftpd:
$ apt-get update $ apt-get install vsftpd Reading package lists... Done Building dependency tree Reading state information... Done [...] The following NEW packages will be installed: vsftpd 0 upgraded, 1 newly installed, 0 to remove and 18 not upgraded. Need to get 111 kB of archives. After this operation, 361 kB of additional disk space will be used. Get:1 http://mirrors.digitalocean.com/ubuntu/ trusty-updates/main vsftpd amd64 3.0.2-1ubuntu2.14.04.1 [111 kB] Fetched 111 kB in 0s (231 kB/s) Preconfiguring packages ... Selecting previously unselected package vsftpd. (Reading database ... 175600 files and directories currently installed.) Preparing to unpack .../vsftpd_3.0.2-1ubuntu2.14.04.1_amd64.deb ... Unpacking vsftpd (3.0.2-1ubuntu2.14.04.1) ... Processing triggers for man-db (220.127.116.11-1) ... Processing triggers for ureadahead (0.100.0-16) ... Setting up vsftpd (3.0.2-1ubuntu2.14.04.1) ... vsftpd start/running, process 18690 Processing triggers for ureadahead (0.100.0-16) ...
The next step is to change any configuration settings for vsftpd. Open the /etc/vsftpd.conf file in your preferred text editor:
$ nano /etc/vsftpd.conf
Edit the file so it resembles the following:
# Example config file /etc/vsftpd.conf # ... # Run standalone? vsftpd can run either from an inetd or as a standalone # daemon started from an initscript. listen=YES # # Allow anonymous FTP? (Disabled by default) anonymous_enable=NO # # Uncomment this to allow local users to log in. local_enable=YES # # Uncomment this to enable any form of FTP write command. #write_enable=YES # You may restrict local users to their home directories. See the FAQ for # the possible risks in this before using chroot_local_user or # chroot_list_enable below. #chroot_local_user=YES
The critical settings seen above are outlined below:
listen=YEStells vsftpd to run as a standalone daemon (the simplest method for getting up and running). anonymous_enable=NO disallows anonymous FTP users, which is generally preferred for security reasons but can be enabled for testing purposes.
local_enable=YESallows any user account defined in the /etc/passwd file access to the FTP server and is generally how most FTP users will connect.
write_enable=YESis commented out by default, but removing the hash (#) allows files to be uploaded to the FTP server. chroot_local_user=YES restricts users to their home directory and is also commented out by default.
To begin your testing and make sure everything is working, start with the following settings for the above parameters:
listen=YES anonymous_enable=YES local_enable=YES write_enable=YES chroot_local_user=YES
vsftpd.conf file then restart the vsftpd service for the changes to take effect:
$ sudo service vsftpd restart vsftpd stop/waiting vsftpd start/running, process 18954
Testing Your FTP Server
To quickly determine if your server was installed properly and is up and running, try to connect to the FTP server from your active shell, using the name anonymous and a blank password:
$ ftp localhost Connected to localhost. 220 (vsFTPd 3.0.2) Name (localhost:root): anonymous 331 Please specify the password. Password: 230 Login successful. Remote system type is UNIX. Using binary mode to transfer files. ftp>
local_enable set to "YES" in the configuration, you should be able to successfully login to your local FTP server as seen above!
With that out of the way, simply enter quit at the ftp> prompt to cancel out:
ftp> quit 221 Goodbye.
With the test complete, you may wish to disable anonymous access once again by setting
anonymous_enable=NO in the
/etc/vsftpd.conf file and restarting the service:
$ nano /etc/vsftpd.conf
Edit the file to resemble this:
# Set to NO to disable anonymous access anonymous_enable=NO sudo service vsftpd restart vsftpd stop/waiting vsftpd start/running, process 18996
Adding an FTP User
If this is a new server it may be advisable to add a specific user for FTP access. Doing so is a fairly simple process but begin by creating a new user:
$ sudo adduser foobar Adding user `foobar' ... Adding new group `foobar' (1000) ... Adding new user `foobar' (1000) with group `foobar' ... Creating home directory `/home/foobar' ... Copying files from `/etc/skel' ... $ Enter new UNIX password: $ Retype new UNIX password: passwd: password updated successfully Changing the user information for foobar $ Enter the new value, or press ENTER for the default Full Name : Room Number : Work Phone : Home Phone : Other : Is the information correct? [Y/n] $ Y
With a new user added you can now connect to your server remotely with an FTP client such as FileZilla, but you will immediately run into an error:
Status: Connecting to 18.104.22.168:21... Status: Connection established, waiting for welcome message... Response: 220 (vsFTPd 3.0.2) Command: USER foobar Response: 331 Please specify the password. Command: PASS **************** Response: 500 OOPS: vsftpd: refusing to run with writable root inside chroot()
The "500 OOPS" error vsftpd returns is a security measure designed to prevent writable root access for FTP users by default. To resolve this issue there are two main options available.
Allowing Writable User-root Access
The simplest method is to alter the
/etc/vsftpd.conf file once again and enable one particular setting:
$ nano /etc/vsftpd.conf
Edit the file so it resembles the following:
# Allow users to write to their root directory allow_writeable_chroot=YES
With allow_writeable_chroot enabled following a service vsftpd restart, you can now successfully FTP into your server remotely as your newly created user:
Status: Connecting to 22.214.171.124:21... Status: Connection established, waiting for welcome message... Response: 220 (vsFTPd 3.0.2) Command: USER foobar Response: 331 Please specify the password. Command: PASS **************** Response: 230 Login successful.
Using Writeable Subdirectories
The other option to maintain slightly stronger security is not to enable allow_writeable_chroot as outlined above, but instead to create a new subdirectory in the user's root directory with write access:
$ sudo chown root:root /home/foobar $ sudo mkdir /home/foobar/uploads $ sudo chown foobar:foobar /home/foobar/uploads $ sudo service vsftpd restart
Now when you connect remotely to your FTP server as the new user, that user will not have write access to the root directory, but will instead have full write access to upload files into the newly created uploads directory instead.
Securing Your FTP With SSL
While standard unencrypted FTP access as outlined so far is sufficient in many cases, when transferring sensitive information over FTP it is useful to utilize a more secure connection using SSL.
To begin you'll likely need to generate a new SSL certificate with the following command, following the prompts as appropriate to complete the process:
$ sudo openssl req -x509 -nodes -days 365 -newkey rsa:1024 -keyout /etc/ssl/private/vsftpd.pem -out /etc/ssl/private/vsftpd.pem
Now you must ensure that vsftpd is aware of the SSL certificate. Open the
/etc/vsftpd.conf file once again:
$ sudo nano /etc/vsftpd.conf
Look near the bottom of the file for two rsa_ settings like this, indicating the location of the SSL certificate that was just created:
If those lines don't exist or match the appropriate path to the SSL certificate created, update them accordingly.
Additionally, there are a number of configuration settings to handle SSL connections, particularly forcing use of the TLS protocol which is ideal:
ssl_enable=YES allow_anon_ssl=NO force_local_data_ssl=YES force_local_logins_ssl=YES ssl_tlsv1=YES ssl_sslv2=NO ssl_sslv3=NO require_ssl_reuse=NO ssl_ciphers=HIGH
Some of the settings are self-explanatory, but the key components are the overall enabling of SSL, the restriction to use only TLS, and disallowing anonymous access.
With the settings added and the file saved, once again restart the vsftpd service:
$ sudo service vsftpd restart
Now your FTP server is ready to accept secure connections using "FTP over TLS" encryption. Using a client such as FileZilla, you will be presented with a certificate popup asking to verify the newly created SSL certification.
Upon accepting you will now be securely connected and transfers will be encrypted via SSL:
Status: Connecting to 126.96.36.199:21... Status: Connection established, waiting for welcome message... Response: 220 (vsFTPd 3.0.2) Command: AUTH TLS Response: 234 Proceed with negotiation. Status: Initializing TLS... Status: Verifying certificate... Command: USER foobar Status: TLS/SSL connection established. Response: 331 Please specify the password. Command: PASS **************** Response: 230 Login successful.